Solar System Lab
Follow the instructions below to construct a spectroscope and answer the corresponding questions.
The instructions below describe how to build a spectroscope. Here is a link if you wish to view the site where the instructions can be found:
http://sci-toys.com/scitoys/scitoys/light/cd_spectroscope/spectroscope.html.
Part One: How to Make a Spectroscope
What you will need:
A CD or DVD that can be sacrificed to this project. Old software CDROMs work great.
A cereal box. Any size that can hold a CD or DVD disk will do.
A sharp knife or razor blade to cut into the cereal box.
Our spectroscope has three main parts: a slit made using a razor blade to make a path for the light; a diffraction grating made from a CD disk; and a viewing port.
To construct your spectroscope, put a slice in one side of the box at roughly a 30-degree angle. This will hold the CD. Place the CD in the slot to determine where to place the other two cuts. On top of the box, cut a hole about one-half inch to one inch square above the CD. On the side opposite the CD, make a very narrow slit. Alternatively, you can cut a larger slit and cover it with two pieces of foil to control the size of the slit. Spectroscope complete!
Once you have assembled your spectroscope according to the instructions in the lecture and above, use it to examine the spectra of three different light sources. Make sure that at least one of them is the sun or moon; but the others can be, for example, incandescent lights, compact fluorescent bulbs, LED lights, halogen or xenon bulbs, televisions, computer screens, candles, or fireplaces. Aim the slit toward the light source you are investigating; then look through the viewing hole to see the spectrum on the disk.
Answer the following questions:
Describe the differences in appearance among the three spectra, including colors, if they are blended together or separated, and fuzzy or distinct.
Which feature of the light source is represented by the spectra? In other words, what is it that you are actually analyzing?
Why do you think spectroscopes are so valuable for studying celestial objects?
Part 2: Estimating the Number of Visible Stars in the Night Sky
For this exercise, you will need an empty toilet paper roll and a clear, dark night. Before you start, jot down the number of stars that you think you can see in the night sky.
Aim your toilet paper roll at a part of the sky well above the horizon to avoid any haze pollution. Hold your roll steady and allow your eyes to get used to the light for a few seconds.
Count the number of stars that you can see through the roll. Do this four more times in other parts of the sky, and then average the five counts.
The viewing diameter of a toilet paper roll is about 1/135th of the entire sky, at least for a relatively flat area. Mountains, buildings, or large trees will obscure some of the sky. To determine the number of visible stars, multiply your average by 135.
Answer the following questions:
What is the average number of stars that you observed through the toilet paper roll?
How similar is this number to your original estimation?
What percentage of our galaxy do you think we can see with the naked eye from Earth?
Part 3: Solar System
Review Atmospheres of the Planets
Answer the following questions:
Why do you think the inner planets are relatively close together, while the outer planets are spaced so widely apart?
Why do you think the outer planets are gaseous, but the inner planets are not?
Your paper should meet the following requirements:
Be 3-4 pages in length
Include 1-2 outside sources
Answer all the questions in well-crafted paragraphs (not Q&A format)
Have an effective introduction, body, and conclusion
Be formatted according to APA
The instructions below describe how to build a spectroscope. Here is a link if you wish to view the site where the instructions can be found:
http://sci-toys.com/scitoys/scitoys/light/cd_spectroscope/spectroscope.html.
Part One: How to Make a Spectroscope
What you will need:
A CD or DVD that can be sacrificed to this project. Old software CDROMs work great.
A cereal box. Any size that can hold a CD or DVD disk will do.
A sharp knife or razor blade to cut into the cereal box.
Our spectroscope has three main parts: a slit made using a razor blade to make a path for the light; a diffraction grating made from a CD disk; and a viewing port.
To construct your spectroscope, put a slice in one side of the box at roughly a 30-degree angle. This will hold the CD. Place the CD in the slot to determine where to place the other two cuts. On top of the box, cut a hole about one-half inch to one inch square above the CD. On the side opposite the CD, make a very narrow slit. Alternatively, you can cut a larger slit and cover it with two pieces of foil to control the size of the slit. Spectroscope complete!
Once you have assembled your spectroscope according to the instructions in the lecture and above, use it to examine the spectra of three different light sources. Make sure that at least one of them is the sun or moon; but the others can be, for example, incandescent lights, compact fluorescent bulbs, LED lights, halogen or xenon bulbs, televisions, computer screens, candles, or fireplaces. Aim the slit toward the light source you are investigating; then look through the viewing hole to see the spectrum on the disk.
Answer the following questions:
Describe the differences in appearance among the three spectra, including colors, if they are blended together or separated, and fuzzy or distinct.
Which feature of the light source is represented by the spectra? In other words, what is it that you are actually analyzing?
Why do you think spectroscopes are so valuable for studying celestial objects?
Part 2: Estimating the Number of Visible Stars in the Night Sky
For this exercise, you will need an empty toilet paper roll and a clear, dark night. Before you start, jot down the number of stars that you think you can see in the night sky.
Aim your toilet paper roll at a part of the sky well above the horizon to avoid any haze pollution. Hold your roll steady and allow your eyes to get used to the light for a few seconds.
Count the number of stars that you can see through the roll. Do this four more times in other parts of the sky, and then average the five counts.
The viewing diameter of a toilet paper roll is about 1/135th of the entire sky, at least for a relatively flat area. Mountains, buildings, or large trees will obscure some of the sky. To determine the number of visible stars, multiply your average by 135.
Answer the following questions:
What is the average number of stars that you observed through the toilet paper roll?
How similar is this number to your original estimation?
What percentage of our galaxy do you think we can see with the naked eye from Earth?
Part 3: Solar System
Review Atmospheres of the Planets
Answer the following questions:
Why do you think the inner planets are relatively close together, while the outer planets are spaced so widely apart?
Why do you think the outer planets are gaseous, but the inner planets are not?
Your paper should meet the following requirements:
Be 3-4 pages in length
Include 1-2 outside sources
Answer all the questions in well-crafted paragraphs (not Q&A format)
Have an effective introduction, body, and conclusion
Be formatted according to APA
Previous answers to this question
This is a preview of an assignment submitted on our website by a student. If you need help with this question or any assignment help, click on the order button below and get started. We guarantee authentic, quality, 100% plagiarism free work or your money back.
Get The Answer